Structural basis of main proteases of HCoV-229E bound to inhibitor PF-07304814 and PF-07321332

PF-07321332 and PF-07304814, inhibitors against SARS-CoV-2 developed by Pfizer, exhibit broad-spectrum inhibitory activity against the main protease (Mpro) from various coronaviruses. Structures of PF-07321332 or PF-07304814 in complex with Mpros of various coronaviruses reveal their inhibitory mechanisms against different Mpros. However, the structural information on the lower pathogenic coronavirus Mpro with PF-07321332 or PF-07304814 is currently scarce, which hinders our comprehensive understanding of the inhibitory mechanisms of these two inhibitors. Meanwhile, given that some immunocompromised individuals are still affected by low pathogenic coronaviruses, we determined the structures of lower pathogenic coronavirus HCoV-229E Mpro with PF-07321332 and PF-07304814, respectively, and analyzed and defined in detail the structural basis for the inhibition of HCoV-229E Mpro by both inhibitors. Further, we compared the crystal structures of multiple coronavirus Mpro complexes with PF-07321332 or PF-07304814 to illustrate the differences in the interaction of Mpros, and found that the inhibition mechanism of lower pathogenic coronavirus Mpro was more similar to that of moderately pathogenic coronaviruses. Our structural studies provide new insights into drug development for low pathogenic coronavirus Mpro, and provide theoretical basis for further optimization of both inhibitors to contain potential future coronaviruses.

Structural basis of main proteases of HCoV-229E bound to inhibitor PF-07304814 and PF-07321332.

PF-07321332 and PF-07304814, inhibitors against SARS-CoV-2 developed by Pfizer, exhibit broad-spectrum inhibitory activity against the main protease (Mpro) from various coronaviruses. Structures of PF-07321332 or PF-07304814 in complex with Mpros of various coronaviruses reveal their inhibitory mechanisms against different Mpros. However, the structural information on the lower pathogenic coronavirus Mpro with PF-07321332 or PF-07304814 is currently scarce, which hinders our comprehensive understanding of the inhibitory mechanisms of these two inhibitors. Meanwhile, given that some immunocompromised individuals are still affected by low pathogenic coronaviruses, we determined the structures of lower pathogenic coronavirus HCoV-229E Mpro with PF-07321332 and PF-07304814, respectively, and analyzed and defined in detail the structural basis for the inhibition of HCoV-229E Mpro by both inhibitors. Further, we compared the crystal structures of multiple coronavirus Mpro complexes with PF-07321332 or PF-07304814 to illustrate the differences in the interaction of Mpros, and found that the inhibition mechanism of lower pathogenic coronavirus Mpro was more similar to that of moderately pathogenic coronaviruses. Our structural studies provide new insights into drug development for low pathogenic coronavirus Mpro, and provide theoretical basis for further optimization of both inhibitors to contain potential future coronaviruses.

Crystal structure of SARS-CoV 3C-like protease with baicalein.

The 3C-like protease (Mpro, 3CLpro) plays a key role in the replication process in coronaviruses (CoVs). The Mpro is an essential enzyme mediates CoVs replication and is a promising target for development of antiviral drugs. Until now, baicalein has been shown the specific activity for SARS-CoV Mpro in vitro experiments. In this study, we resolved the SARS-CoV Mpro with baicalein by X-ray diffraction at 2.25 Å (PDB code 7XAX), which provided a structural basis for the research and development of baicalein as an anti-CoVs drug.

Simultaneous detection of SARS-CoV-2 and pandemic (H1N1) 2009 virus with real-time isothermal platform.

The recent ongoing outbreak of novel coronavirus SARS-CoV-2 (known as COVID-19) is a severe threat to human health worldwide. By press time, more than 3.3 million people have died from COVID-19, with many countries experiencing peaks in infections and hospitalizations. The main symptoms of infection with SARS-CoV-2 include fever, chills, coughing, shortness of breath or difficulty breathing, fatigue, muscle or body aches and pains. While the symptoms of the pandemic (H1N1) 2009 virus have many similarities to the signs and transmission routes of the novel coronavirus, e.g., fever, cough, sore throat, body aches, headache, chills and fatigue. And a few cases of serious illness, rapid progress, can appear viral pneumonia, combined with respiratory failure, multiple organ function damage, serious people can die. Therefore, there is an urgent need to develop a rapid and accurate field diagnostic method to effectively identify the two viruses and treat these early infections on time, thus helping to control the spread of the disease. Among molecular detection methods, RT-LAMP (real-time reverse transcription-loop-mediated isothermal amplification) has some advantages in pathogen detection due to its rapid, accurate and effective detection characteristics. Here, we combined the primers of the two viruses with the fluorescent probes on the RT-LAMP detection platform to detect the two viruses simultaneously. Firstly, RT-LAMP method was used respectively to detect the two viruses at different concentrations to determine the effectiveness and sensitivity of probe primers to the RNA samples. And then, the two virus samples were detected simultaneously in the same reaction tube to validate if testing for the two viruses together had an impact on the results compared to detecting alone. We verified the detection efficiency of three highly active BST variants during RT-LAMP assay. We expect that this assay can effectively and accurately distinguish COVID-19 from the pandemic (H1N1) 2009, so that these two diseases with similar symptoms can be appropriately differentiated and treated.

Sample-to-answer COVID-19 nucleic acid testing using a low-cost centrifugal microfluidic platform with bead-based signal enhancement and smartphone read-out.

With its origin estimated around December 2019 in Wuhan, China, the ongoing SARS-CoV-2 pandemic is a major global health challenge. The demand for scalable, rapid and sensitive viral diagnostics is thus particularly pressing at present to help contain the rapid spread of infection and prevent overwhelming the capacity of health systems. While high-income countries have managed to rapidly expand diagnostic capacities, such is not the case in resource-limited settings of low- to medium-income countries. Aiming at developing cost-effective viral load detection systems for point-of-care COVID-19 diagnostics in resource-limited and resource-rich settings alike, we report the development of an integrated modular centrifugal microfluidic platform to perform loop-mediated isothermal amplification (LAMP) of viral RNA directly from heat-inactivated nasopharyngeal swab samples. The discs were pre-packed with dried n-benzyl-n-methylethanolamine modified agarose beads used to selectively remove primer dimers, inactivate the reaction post-amplification and allowing enhanced fluorescence detection via a smartphone camera. Sample-to-answer analysis within 1 hour from sample collection and a detection limit of approximately 100 RNA copies in 10 µL reaction volume were achieved. The platform was validated with a panel of 162 nasopharyngeal swab samples collected from patients with COVID-19 symptoms, providing a sensitivity of 96.6% (82.2-99.9%, 95% CI) for samples with Ct values below 26 and a specificity of 100% (90-100%, 95% CI), thus being fit-for-purpose to diagnose patients with a high risk of viral transmission. These results show significant promise towards bringing routine point-of-care COVID-19 diagnostics to resource-limited settings.

SARS-CoV-2 detection by extraction-free qRT-PCR for massive and rapid COVID-19 diagnosis during a pandemic in Armenia.

COVID-19 pandemic severely impacted the healthcare and economy on a global scale. It is widely recognized that mass testing is an efficient way to contain the spread of SARS-CoV-2 infection as well as aid in the development of informed policies for disease management. However, the current COVID-19 worldwide infection rates increased the demand for rapid and reliable screening of infection. We compared the performance of qRT-PCR in direct heat-inactivated (H), heat-inactivated and pelleted (HC) samples against RNA in a group of 74 subjects (44 positive and 30 negative). Then we compared the sensitivity of HC in a larger group of 196 COVID-19 positive samples. Our study suggests that HC samples show higher accuracy for SARS-CoV-2 detection PCR assay compared to direct H (89 % vs 83 % of the detection in RNA). The sensitivity of detection using direct samples varied depending on the sample transport and storage media as well as the viral loads (as measured by qRT-PCR Ct levels). Altogether, all the data suggest that purified RNA provides more accurate results, however, direct sample testing with qRT-PCR may help to significantly increase testing capacity. Switching to the direct sample testing is justified if the number of tests is doubled at least.

Colorimetric isothermal nucleic acid detection of SARS-CoV-2 with dye combination.

RT-LAMP detection of SARS-CoV-2 has been demonstrated to be a valuable diagnostic method for the diagnosis of COVID-191,2, which can rapidly screen carriers of the virus to effectively control the spread of the SARS-CoV-2. Here, we present a combination of dyes for isothermal detection of SARS-CoV-2 as a commercial alternative, with expanded colorimetric spectrum. We compared them with commercial reagents and proved their suitability and sensitivity through clinical RNA samples. In addition, together with commercial single dye indicators, we believe the expanded color spectrum developed here as an indicator of rapid detection will promote the diagnosis of COVID-19.

Direct detection of SARS-CoV-2 using non-commercial RT-LAMP reagents on heat-inactivated samples.

RT-LAMP detection of SARS-CoV-2 has been shown to be a valuable approach to scale up COVID-19 diagnostics and thus contribute to limiting the spread of the disease. Here we present the optimization of highly cost-effective in-house produced enzymes, and we benchmark their performance against commercial alternatives. We explore the compatibility between multiple DNA polymerases with high strand-displacement activity and thermostable reverse transcriptases required for RT-LAMP. We optimize reaction conditions and demonstrate their applicability using both synthetic RNA and clinical patient samples. Finally, we validate the optimized RT-LAMP assay for the detection of SARS-CoV-2 in unextracted heat-inactivated nasopharyngeal samples from 184 patients. We anticipate that optimized and affordable reagents for RT-LAMP will facilitate the expansion of SARS-CoV-2 testing globally, especially in sites and settings where the need for large scale testing cannot be met by commercial alternatives.

[Optimization of a fluorescent qPCR detection for RNA of SARS-CoV-2].

We optimized a fluorescent quantitative polymerase chain reaction (qPCR) assay system for rapid and real time detection of SARS-CoV-2 RNA. The results show that the lowest dilution of RNA samples used for the detection of SARS-CoV-2 RNA could reach 1/10 000 (the initial value is set as 10 ng/µL). Moreover, the cycle threshold (Ct) for samples of clinically diagnosed COVID-19 was lower than 35 or 40. The sensitivity of this method was satisfactory. The results were consistent with those of the COVID-19 detection kit on the market under the same conditions, but the number of cycles required was shortened by about 2. Therefore, the optimized assay developed in this study can be used in screening and early clinical diagnosis. Our work provides a tool to facilitate rapid clinical diagnosis of COVID-19.